SAFE-T LANE interlocking concrete Bike Lane Dividers featuring the Patented Slip-Lock Connectors create a Fully Protected Bike Lane.  Made from 5,000 psi concrete and reinforced with steel, the SAFE-T LANE Divider will hold up to the most extreme environments and impacts.  Each unit weighs 1,700 lbs for a robust physical barrier. The patented Slip-Lock connectors allow each barrier to be easily installed with a 2-man crew.  The Slip-Lock connector is self-aligning and automatically connects each piece together once set.  The Slip-Lock Connector also allows for an anchor pin to be inserted to allow each section to be physically anchored to the asphalt or concrete for an even more rigid and safe protected bike lane.

• Creates a true Protected Bike Lane!
• Made from 5,000 psi concrete and reinforced with steel
• Patented Slip-Lock Connectors for simple, quick installation
• Slip-Lock Connectors made to accept an anchor pin creating a rigid, robust barrier
• Self-Aligning – Automatically locks each piece together
• Slip-Lock Connector allows for 5 degrees of curvature as well as allowing for vertical and horizontal deflection
• 10’ long x 1’6” tall straight sections – 1,700 lbs
• 4’ Long tapered end section available for smooth transitions
• Drainage slots running both through the barrier and the length of the barrier allow for unimpeded continuous drainage.
• Easily remove and replace any section by simply lifting vertically
• Slip-Lock Connector allows for easy post/signage installation within the connector itself